1200°C 100OD Lab Horizontal Vacuum Tube Furnace Heater

Description

This listing is one brand new
STF1200 1200°C
split tube furnace with two 100mm OD x 1000mm L quartz tubes.
STF1200
series split tube furnaces feature the famous
Kanthal
spiral wire coils embedded in alumina fiber insulation. A double walled steel internal housing helps minimize heat loss to exterior surface.
Furnace operation is controlled by Shimaden 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results.
All our furnaces are CE compliant.
Features
Compact, portable and lightweight design.
Split furnace chamber for fast and easy tube access.
Standard package includes set of stainless steel vacuum sealing flanges with valves and pressure meter.
Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot.
Multiple atmosphere processes in a single cycle are possible (ex: binder burn out in air and parts sintering under rough vacuum or inert gas environment.)
Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
Built-in computer interface.
Long life type K thermocouple.
One year warranty with lifetime US-based parts and service support.
Safety
Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions.
Power failure protection resumes furnace operation right after the point of failure when power is reestablished.
Specifications
Tube Material
Quartz
Tube Size
100mm OD x 93mm ID x 1000mm L
Maximum Working Temperature
1200°C
Constant Working Temperature
0-1100°C
Heating Element
Kanthal resistance coil wire
Thermocouple Type
K
Refractory Lining
1600 grade fiber alumina
Temperature Controller
Shimaden fp93 (made in Japan) with 4 programs and
40 segments (ie. 4 x 10 segments or 2 x 20 segments)
.
Maximum Heating & Cooling Rate
< 30°C / min
Heating Zone Length
18"
Constant Temperature Zone Length
6"
Temperature Controller Precision
+/- 1°C (+/- 1.8°F)
Vacuum Sealing Flange Kit
Stainless steel vacuum sealing flanges with one vacuum gauge,
two valves and four thermal ceramic blocks.
Electrical requirements
208-240V AC, 50/60 Hz, single phase, 2.5kW
Gas inlet/outlet
1/4" hose barb with 1/4" BSPT (British Standard Pipe Thread)
Furnace Size
25 x 18 x 23" (LxWxH, height is 34" with cover open)
Shipping Weight
400 Lb
Shipping Size
46 x 21 x 36
" (LxWxH)
CE compliance
Yes
Standard package
Part description
Quantity
Part image
STF1200 split tube furnace with L6-30P 250v twist-lock plug
1 pc
Quartz tube 100mm OD x 1000mm L
2 pcs
Stainless steel vacuum sealing flanges w/ pressure meter
1 set
Stainless steel hook
1 pc
Alumina ceramic thermal block
2 pairs
Thermal gloves
1 pair
High temperature Al
2
O
3
alumina crucible (100x40x20mm)
5 pcs
Spare fuse
2 pcs
USB/RS485 computer interface kit
1 set
Furnace operation manual
1 pc
Shimaden fp93 temperature controller manual & software
1 pc