Ai 110V 5-Sided UL/CSA Certified 1.9 CF Vacuum Oven w/ EasyVac 9 cfm Pump

Description

Important: please provide us your phone number in the order memo section, if you have not specified one before with eBay, we need it for freight delivery, thank you!
This listing is for a brand new UL/CSA certified 110V 50/60Hz Ai AccuTemp 1.9 cu ft vacuum drying oven (chamber size 16.5 x 14.5 x 14") with an Ai 110V/220V switchable EasyVac 9 cfm dual stage high speed vacuum pump, exhaust filter and KF/NW25 fittings, manufactured by Across International.
Introducing the new UL/CSA certified 110V Ai AccuTemp 1.9 cubic foot vacuum ovens, come standard with
stainless steel tubing, stainless steel vacuum & vent valve, oil-filled vacuum gauge, 5 sided pad heating technology
and
two year warranty
. The thermal-conductive aluminum pan shelves provide excellent temperature uniformity inside the chamber, while standard is
the 3rd gen LCD low proportional gain temperature controllers
keep your oven temperature within +/- 1°F accuracy, in
either °F or °C
.
AccuTemp-19 series digital desktop vacuum ovens feature a 1.9 cubic foot easy-to-clean stainless steel chamber with a large dual-layer tempered glass safety window and small footprint. These ovens can greatly reduce drying time by maintaining a consistent vacuum level within the chamber.
Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is 100% quality controlled in New Jersey or Nevada before leaving our facilities.
Attention: Before initial use, run oven at 400°F without vacuum for 15 minutes to burn off any residue that may have been introduced during the manufacturing process.
Features
All stainless steel internal tubing
provides higher ultimate vacuum, holds vacuum 10 times longer, and require minimum maintenance.
Oil-filled mechanical vacuum gauge
provides more accurate reading, longer gauge life and minimizes shipping damage.
All stainless steel vacuum and vent valves
gives you cleaner connection, more accurate control and long term durability.
New
5 sided pad heating technology
and aluminum shelves provide excellent temperature uniformity and faster heating rates (25% faster in our lab test).
Adjustable gas back fill capability
with needle valve and vent port.
3rd gen LCD low proportional gain temperature controllers
keep your oven temperature within +/- 1°F accuracy, in
either °F or °C
Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time.
Dual layer observation window with 1/2" tempered safety glass.
3" thermal insulation prevents heat loss and minimizes the enclosure's outer surface temperature.
Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.
Built-in inch mercury vacuum gauge and circuit breaker.
Built-in check valve prevents vacuum oil back-flow.
Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature.
All ovens shipped from our New Jersey or Nevada location for quick delivery, and come with
two year warranty
and lifetime US-based parts and service support.
Guaranteed US based phone and email assistance within 30 minutes from our engineers.
M
anufactured in accordance with
UL 61010-1
CSA C22.2
ISO 9001:2000
ISO 12100-1:2003, ISO 12100-2:2003
EN1050:1996, EN294:1992, EN60204-1:2006
CE
Optional components
Stone shelves
Multi-color LED lights
30-segment ramp temperature controller
Single or dual stage, oil or oil free vacuum pumps with fume/mist filter and fittings
Gas inlet
KF25 to 3/8" hose barb or flare adapters
Vacuum oven specifications
Power
110V +/-10% 50/60Hz 1-PH 13.6A
Heaters
1500 watts
Chamber material
Stainless steel
Temperature controller
Low proportional gain, PID control for heater output by microcomputer
Temperature range
Ambient to 480°F
Temperature units
Fahrenheit or Celsius
Temperature accuracy
+/- 1°F
Temperature uniformity
+/- 6% of set-point
Warm-up time to 100°F
~ 45 minutes
Dwelling timer range
1-9999 minutes
Chamber dimensions
16.5 x 14.5 x 14" (WxDxH)
Unit dimensions
28 x 20 x 21.75" (WxDxH). With handle and vacuum port: 28 x 23 x 21.75" (WxDxH)
Shipping dimensions
32 x 27 x 28" (WxDxH)
Vacuum level
Better than 500 microns/millitorrs
Maximum vacuum
29.9" Hg (may vary base on your altitude)
Vacuum gauge range
0 to 30" Hg
Vacuum connector
KF25/NW25 flange
Unit weight
140 Lb
Shipping weight
200 Lb
Shelves
Holds maximum 5 shelves (included with oven purchase)
Distance between shelves
2"
Door gasket material
Silicone
Observation window
1/2" tempered safety glass
Safety
Built-in circuit breaker, overheat protector
Vacuum pump specifications
Electrical requirements
110/220V switchable, 50/60Hz single phase, 560 watts
Type
Dual stage sliding-vane rotary pump
Pumping rate
9 cfm
Vacuum level
15 micron/millitorr
Working environment
-5°C to 60°C
Oil volume
600 ml
Unit/shipping weight
35 Lb / 37 Lb
Recommended oil
Ultra-grade 19
Vacuum/exhaust connector
KF/NW25 flange
Motor rate
1720 rpm
Unit dimensions
16 x 6 x 11"
CE compliant
Yes
Standard package
Part desciption
Quantity
Part image
AccuTemp
1.9 cu ft vacuum oven
1 pc
Aluminum pan shelf
5 pcs
Ai EasyVac
9 cfm dual-stage vacuum pump with filter
1 set
KF25 stainless steel vacuum bellow (3 ft)
1 pc
KF quick clamp
2 pcs
KF sealing o-ring
2 pcs
User's manual
2 pcs