AI SuperVac 5.6 cfm Corrosion-Resist Commercial Grade 2-Stage Vacuum Pump Oven

Description

The new AI SuperVac 5.6 cfm commercial grade heavy duty dual-stage vacuum pump is now corrosion-resistant! This pump will take your vacuum down to 0.3 micron in minutes, they are designed for reliable long time continuous operation. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run.
Adjustable gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust.
It is important to note that pumps should always be ran in a well ventilated area.
Free high capacity exhaust oil mist filter (9 value), KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set (9 value) included.
Features
Adjustable gas ballast
Built-in oil back-flow prevention check valve
Internal forced oil cycling system
Integrated cylinder structure
Exhaust filter with easy-to-change replaceable filter element
Heavy duty structure and designed for reliable long time operation
Low noise
All necessary fittings and filter included for immediate use
Specifications
Electrical requirements
110v 60Hz single phase, 400 watts
Pumping rate
5.6 cfm
Ultimate vacuum without gas ballast
0.
3 micron/millitorr
Ultimate vacuum with gas ballast
6 micron/millitorr
Inlet/outlet
connection
KF25/NW25 flange
Oil volume
1 liter / 1.06 quart
Motor rate
1720 rpm
Working temperature
5 to 40°C
Unit
dimensions (LxWxH)
17 x 6.75 x 9.75" or 17 x 6.75 x 16" (with filter)
Shipping dimensions (LxWxH)
23 x 8.5 x 13"
Unit weight
46 Lb
Shipping weight
55 Lb
Recommended oil
Ultragrade 19
Noise level
< 56 dB
CE compliance
Yes
Standard package
Part description
Quantity
Part image
AI SuperVac 5.6 cfm vacuum pump with exhaust oil mist filter
1 set
KF25 flexible stainless steel vacuum bellow (3 ft)
1 pc
KF25 wing nut flange quick clamp
2 pcs
KF25 flange centering ring
2 pcs
User's manual
1 pc