SH Scientific economic muffle furnace, 1050℃, 11liters, annealing and combustion

Description

SH Scientific muffle furnaces offers from 1050 ℃ to 1800 ℃ with unbeatable prices.
SH Scientific’s economic muffle furnace goes up to max 1050 degrees Celsius (℃) and the ideal operating temperature is 850 degrees Celsius (℃).
If your testing is carried out under this temperature in any case, do not overpay for standard design. This economic muffle furnace is designed for your budget-saving.
Our MGE series are the most affordable quality muffle furnace in the market. Save your budget.
Our muffle furnace takes less than 40min to reach 800℃.
SH Scientific muffle furnaces are ideal for wide range of application including ashing, calcination, reduction, oxidation, dissociation, sintering, pyrolysis, reaction, hardening and tempering, melting, thermocouple calibration, annealing, stress relieving and etc.
11L chamber (L200xD310xH180mm)
Economic muffle furnace with flap door- General laboratory use and ashing process
Recommended ideal running temperature is below 850℃
Heating from 3 sides
Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
Single housing
Ceramic fiber materials which are not classified as carcinogenic
Light weight
Prompt heat up and good maintaining
SSR operation and PID control provides low noise operation and precise temp control (+/-1℃)
Muffle furnaces are needed when you carry out heat-involved testing and treatment with rapid high-temperature heating, recovery and cooling in self-contained energy-efficient cabinets. Muffle furnaces are ideal for ashing samples, heat-treating applications and material testing and research.
Our programmable controller enables you to perform cyclic oxidation and treatment test at ease.
These days the use of furnaces are more rapidly growing throughout the advanced industries such as secondary battery, graphene battery, polymer composite, treatment of titanium
Good news! Are you looking for vacuum muffle furnace for carbon-free atmosphere for metal injection molding, metallization and sintering?
SH Scientific vacuum muffle furnace is the solution providing a precisely defined atmosphere with the highest possible purity.
Model
SH-FU-11MGE
Max temperature
1050℃
Continuous running temperature
850℃
Chamber volume
11liters
Controller
Digital PID controller
Sensor
K type
Heater
2.8kW
Heating element
KANTAL A-1 with ceramic fiber
Insulation
Ceramic
Power supply
110V, 50/60Hz, 1p, 25A
220V, 50/60Hz, 1p, 13A
Net weight
34kg
Chamber size
200x310x180mm
External size
370x470x480mm