Split tube furnace, Horizontal, 34000 W, 3 zone, 2200 deg F, TSP-11.5 Thermcraf

Description

Split tube furnace, Horizontal, 34000 W, 3 zone, 2200 deg F, TSP-11.5 Thermcraf
Used large Thermcraft 2200 Deg horizontal split tube furnace system in good condition. The furnace is mounted on a steel frame by hanging from  the upper turn-buckles and dual rear frame clamps which provide vertical adjustment of height. The two posts under the furnace hold the incoloy process tube / vacuum chamber. The tube chamber is a 8" diameter vessel which can be used as a vacuum or inert gas environment. Furnace is a split clam-shell design that opens upward with the aid of a counter weight system. No controllers are included. System was used as an R&D project to prove a process and is in very good condition. We have three of these units that are very similar aside from the port configuration. The furnace could be used  in its current configuration with the process tube or it could be slightly modified if a more traditional straight through tube furnace is required. Currently this furnace does not have the same size port openings on both sides but the refractory material could always be cut to make a uniform opening all the way through the chamber. The other two chambers we have are identical except the left side is blocked off and the furnace wall would need to be cut out along with the refractory brick material to make a traditional tube furnace.
34,000 watts
3 zones
Zone 1: 10850 watts, 13 amps
Zone 2: 9326 watts, 11.23 amps
Zone 3: 13824 watts, 16.65 amps
Max temp: 2200 deg F (1200 C)
480 VAC
41 amps
3 phase
Furnace center line to floor: 74.5"
Process tube/vacuum chamber:
incoloy
15" OD bottom flange
chamber size: 7.25" dia x
Specifications:
MFG:       Thermcraft
Model:     TSP-11.50-0-32-3C-J5882/1A.
Serial:     015882/1A
Volts:       480
Amps:     41
Phase:    3
Weight:   1090 Lbs
Condition: Used
Length:   52
Width:     44
Height:     116
All dims inches unless otherwise noted
Inventory #: 6473
WE SHIP INTERNATIONALLY
contrary to the Ebay
statement
that says we only ship to united states.
Contact us for shipping quotes
International purchases: A documentation processing fee will be added to total purchase for items under 0.
Our company return policy is that our description is guaranteed and we will accept returns in the event an item is mis-described.
When communicating with us please use your own email address.  We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system.
Send emails to heritageequipment AT gmail . com
The new ebay buyer protection program has inspired us to offer all of our items “as-is”.
This does not mean that you are buying a machine with deficiencies, known or unknown.
What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine.
In addition to this written description you will have the opportunity to view high quality photos of the item.
With these two sources of information you will have as much information as possible without being physically here to inspect the machine.
Feel assured that we will make a diligent effort to give you an accurate description of the equipment.
As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine.
Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment.
The very few times we have had to deal with these issues we have been very helpful in resolving the problem.